Features & Benefits

Non-Contact | Value | Easy Access | Strong & Lightweight | Ventilated | Security | Galvanized Steel | Tent Fabric

Bike Barn Motorcycle Cover Frame Structure

"Castle for a King" galvanized steel tube construction for maximum strength and corrosion. Frame shown in closed position without cover.   How to Install the Reversible Lock Bars     Click on images to enlarge them. Padlocks and Anchor Bolts not included. Side 1 Reversible Lock Bar is bolted to the base tube. Use the two holes that line up with the holes in the base tube shown in red.   Side 2 Reversible Lock Bar is bolted to the base tube. Use the two holes that line up with the holes in the base tube shown in red.               Securing the Base Plate and Cam Lock Straps       Base Plate Use base plate to securely fasten rear end of frame to the ground.   Cam Lock Straps Bolt Cam Lock straps to the ground at the front end feet. Use Cam Lock Straps to secure Bike Barn in the closed position.

1. Non-Contact Motorcycle Cover

• Don't worry about hot exhaust pipes melting fabric covers - there's no contact of fabric to pipes.
• Largest models on the market.
• Three sizes available.
• No contact on opening and closing with cantilever design.
• Non-contact means that dirt and dust are not ground into your paint from the wind rippling the fabric.
• Keeps curious hands from tweaking and turning leavers and buttons.

back to top

2. Value

• The Bike Barn motorcycle covers will stand the test of time. We have Bike Barns that are 16 years old and still going strong.
• Most typical covers need to be replaced every year at a cost of $100+each. Work it out you could save 100 of dollars.
• Winter storage inside a self storage compartment can run over $100/month.
• The Bike Barn pays for itself in one winter. You start saving right away.

back to top

3. Easy Access

• 2/3 opening makes for easy entry and mounting/dismounting of bike.

back to top

4. Strong & Lightweight

• All the weight is in the frame.
• Frame can handle distributed snow load of 75 pounds.

back to top

5. Ventilated

• Designed for natural ventilation.
• Vents allow natural convection to exhaust hot air from motor.
  
  
  Vent Flaps for maximum air flow

back to top

6. Security

• Motorcycle is out of sight out of mind.
• Grounding plate made of strong 12 gauge galvanized steel.
• Locking bar as primary deterrent.
• Ground anchor straps at front.
  
  
  Reversible Lock Bar secures Bike Barn frame in closed position (padlock not included)

back to top

7. Galvanized Steel

• Commercial grade galvanized steel frame.
• Galvanized inside and outside for long term rust protection.

back to top

8. Tent Fabric

• Commercial grade woven polyester fabric with long life UV testing.
• Will not rot in sun.
• Water repellent on outside.
• Polyurethane coating on inside for waterproofing.
• Minimal fade after 2 years.

back to top